Owners Manual

7
INSTALLATION
Cart assembly instructions
IMPORTANT!
Once the carts are linked, they cannot be moved. Moving the carts once linked could damage the carts.
Linking carts together (optional)
To link two or more CAD1 carts, the following instructions must be done first, using the hardware
provided, before installing the top modules.
1 Hand tighten two bolts, four washers, and two nuts on the front and back sides of the carts as shown.
2 Carefully wrench tighten fasteners once carts are aligned with each other.
Front side
Head of bolt with
washer
Front side
Head of bolt with
washer
Back side
End of bolt with
nut and washer
Back side
End of bolt with
nut and washer