Owners Manual

8
"A"
"B"
"C"
"D"
"D"
"E"
"E"
"H"
"G"
"F"
"J"
If necessary to gain clearance inside the rough-in
opening a hole can be cut through the adjacent cabi-
net and the power cord routed through this hole to a
power outlet. Another way to increase the available
opening depth is to recess the power outlet into the
rear wall to gain the thickness of the power cord plug.
US
CA
ROUGH-IN OPENING DIMENSIONS CABINET DIMENSIONS
MODEL "A" "B" "C" "D" "E" "F" "G" "H" "J"
All Models
24
1
⁄4" (61.6 cm)
24 ½" (62 cm)
(with optional DCS
side trim kit)
**34" to 35"
(86.4 to 88.9 cm)
*
23
7
⁄8"
(60.7 cm)
33
3
⁄4" to 34
3
⁄4"
(85.7 to 88.3 cm)
23
23
⁄32"
(60.2 cm)
26
1
⁄4"
(66.7 cm)
46
13
⁄32"
(117.9 cm)
26
1
⁄4"
(66.7 cm)
PRODUCT DATA
MODEL
ELECTRICAL
REQUIREMENTS***
PRODUCT
WEIGHT
All Models 115V/60Hz/15A
140 lbs
(63.6 kg)
Figure 9
21
1
⁄2"
(54.6 cm)
12
1
⁄4"
(31.1 cm)
11
15
⁄16"
(30.3 cm)
11"
(27.9 cm)
Figure 8
* Depth dimension of rough-in opening may vary depend-
ing on each individual installation. To recess entire door "F"
dimension plus 1" (2.5 cm) for thickness of power cord plug
is required.
** Minimum rough-in opening required is to be larger than
the adjusted height of the cabinet.
*** A grounded 15 amp dedicated circuit is required. Follow
all local building codes when installing electrical and appli-
ance.
PRODUCT DIMENSIONS
Figure 8a