User manual

dCS 950 / 952 User Manual Manual for Software Version 6.2x
dCS Ltd 22
nd
May 2000
Manual part no: DOC0029526B1 Page 41 Document No: OS-MA-D0002-952.6B1
Contact dCS on + 44 1799 531 999 email to: [e-mail]
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
Power Consumption
The dCS 950 / 952 has a linear power supply, and so power consumption
changes as the mains voltage changes. The internal regulation is comparatively
efficient for a linear supply, so these changes are kept to a minimum.
Consumption is independent of mains voltage selector switch setting.
Power Consumption with Mains Voltage (measured as AC power into mains
socket):
Nominal mains 28 W
Mains -10% 26 W
Mains +10% 31 W
The actual intended supply voltage is shown on the rear panel. 50Hz or 60Hz
operation is not important – the unit can use either. In general, users will not
need to change the mains input configuration. If you do need this to be done,
please see the section "Having Your Options Changed”, page 44 in this
manual and contact your distributor or dCS.