Specifications

10
Built–In Grill Clearances
GENERAL
The Grill is designed for easy placement into masonry enclosures. For non-combustible applications
the grill drops into the opening shown in (Fig. 04) and hangs from its side flanges. A deck is not
required to support it from the bottom.When using the insulated jacket in a combustible enclosure
application, see the bottom of Fig. 04.The jacket assembly must be supported from the bottom by a
ledge on each side or a solid deck beneath the entire grill or insulated jacket
Review the detail drawing shown (Fig. 04) and take into account the provisions shown for gas line
hook-up clearance in the left rear corner. It is recommended that ventilation holes are provided in the
enclosure in the event of a gas leak. The supporting ledges or deck must be level and flat. The counter
should also be level.