INSTALLATION CART ASSEMBLY INSTRUCTIONS IMPORTANT! Read all instructions before you begin. Db not jump ahead or skip. any step. CAUTION! Some parts have sharp edges; care: must be taken manhandling the various components to avoidably. Please read safety information provided in these instructions before beginning assembly. Wear gloves when ha sidling. Two.or more people should work together to-assemble the cart and grill head.
INSTALLATION CART ASSEMBLY INSTRUCTIONS STEP 1 Attach Side Half on eightieth Side {left side is optional side burner location) 1.. Attach shelf to right'side of the cart using donuts bolts provided (leave out {1} bolt front side as Shawn enjoin. 2. Do not tighten bolts finger tight only) until completing Step 4. 5. Install bumptiousness sides of the carats shown below, stall all bolts hols & 14-20 nuttiness In the rear brackets ag shown.
INSTALLATION CART ASSEMBLY INSTRUCTIONS Ind Paint FIG A005 gal over boor Digerati of cnt (be HE Gill head should restorer reiterate. Ff, 12 Secure gall to raid of cart with (Zh Phil: aware of fits points), flange as shown above. lips heart sows provided [10-24% 42') STEP 3 Front End Screw Installation t. Instrumentalist (8)screws in front of head to cart 2. Slidedriptray/panback into place. Move side shelf bars up.and set trays. into.place.
