Manual

INSTALLATION

BUILT-IN CONSTRUCTION DETAILS

Access Drawers

Cutout dimensions

Vent _

j - Venr_

Opt real support

bocations _*

FIG. 06

NOTE: The cutout of each corner should be 90°angle in order for the access

drawers to fit properly.

* Island installation to use minimum of 3 vents, 10 square inches per vent (typical).

** For proper support and drawer operation, insure that support boards are

installed per Installation Guide instructions.

MODEL NUMBER A B C

(+O,-1/8) (+1/8,-O)

ADR48 46" 20" 24-1/2"

ADR36 34" 20" (Min,

ADR30 28" 20" All

ADR24 22" 20" Models)

Access Doors -

Cutout dimensions

Vent*

Cutout for Access Doors

FIG. 07

NOTE: The cutout of each corner should be 90°angle in order

for the access doors to fit properly.

* Island installation to use minimum of 3 vents, 10 square

inches per vent (typical).

MODEL NUMBER A B

(+O,-1/8) (+1/8,-O)

ADN20x48 46" 20"

ADN20x36 34" 20"

ADN20x30 28" 20"

ADN20x24 22" 20"