Use and Care Guide

8
INSTALLATION
INSTALLATION OF SIDE BURNER ON CAD130 CART
STEP 1
Remove the cover, grate, and drip pan from the side burner.
STEP 2
Attach the two provided 10-24 x 1 hex head bolts to the upper holes of the side panel. Do not completely tighten
them yet. Leave an 1/8” space under the bolt head as shown on Fig. 03.
STEP 3
Use these two bolts to attach the side burner through the keyholes as shown on Fig. 03.
ADDENDUM – SIDE BURNER INSTALLATION
MODELS: BGB131/BGB132
This addendum supplements the Use and Care and Installation Guide (238044 Rev. B). If you
have a Cart Access Drawers (CAD-30) and wish to install the BGB131/132 on the cart, use the
following instructions and hardware as an addendum to page 5 and to replace pages 6 and 7.
Page 5:
Contents Qty. Part No.
2 211338
2 211328
Hex head bolt
10-24 x 1
Hex head bolt
1/4-20 x 3/4
Fig.01
Keyholes
Bolts
(211338)
Tools Required
5/16 Wrench
7/16 Wrench
Pages 6 and 7:
STEP 1
Remove the cover, grate, and drip pan from the side burner.
STEP 2
Attach the two provided 10-24 x 1 hex head bolts (211338) to the upper holes of the side panel. Do
not completely tighten them yet. Leave an 1/8” space under the bolt head as shown on Fig. 01.
STEP 3
Use these two bolts to attach the side burner through the keyholes as shown on Fig. 01.
Continued on back
FIG. 03