User guide

21
US
CA
Troubleshooting
Problem Possible causes What to do
Cooktop burners
There is a power failure –
can I still use the cooktop
burners?
Power outage in your area. The cooktop burners can still be
used. To light them:
1 Holding a lighted match to
the flame spreader, push
in on the control knob and
turn counterclockwise to
LITE.
2 When the flame is burning
all the way around the
burner, you may adjust the
heat.
Important!
If the flame is blown out during
a power failure, turn the knob
immediately to
OFF
, as the
burner will not automatically
relight and gas may escape.
The flames have
suddenly gone out.
A draft or a spill has extinguished
the flame.
No action required. The
burner will detect this and
automatically relight. However,
if there has been a large spill,
we recommend turning the
burners off and cleaning the
burners and sump area. See
‘Care and cleaning’ for
instrucions.
There is a slight
‘extinction pop’ or
flash after I’ve turned a
cooktop burner off.
This is normal for LP gas and
requires no action.