Specifications

6
COOKTOP USE
CAUTION:
For warranty coverage, DCS requires that burner adjustments be made by a qualified technician at the time of instal-
lation. Extreme care should be used when adjustments are made after installation.
CONTROL KNOBS:
The control knobs and knob bezels are readily associated with the burners they control and are located on the
right hand side of the Cooktop. The sealed top burners have an infinite number of heat settings and there are no
fixed positions on the control knobs between HI and SIM (with the exception of LOW). To light the burner push
control knob in and rotate counterclockwise. An audible clicking sound will be heard and the burner should light
immediately. To use, turn the knob to the desired setting.
COOKING UTENSILS:
For best results we recommend using Professional Cookware. These
can be found at your finer department stores, specialty cooking
shops, or restaurant supply stores. If using regular cookware be
very careful if the pans have plastic handles, as these large profes-
sional size burners can flame up on the outside of the pan and
melt or bubble the handles.
THESE GRAPHICS
SHOW BURNER
LOCATION:
RIGHT FRONT
BURNER
BURNERS:
Your new Drop-In Cooktop is equipped with burners
t
ypical of those used in r
estaur
ants. These restaurant
style burners are comprised of high strength die cast
aluminum burner bases and simmer port rings,
pr
ecision f
or
ged br
ass por
t r
ings, and cast iron
burner caps.
Model CTD-365 cooktop is equipped with 4 burners
rated at 11,000 Btu/hr, and one high-output burner
rated at 17,500 Btu/hr. Model CTD-304 is equipped
with 2 burners rated at 11,000 Btu/hr, 1 burner rated
at 10,000 and 1 high-output burner rated at 15,500
Btu/hr (for natural gas). All Drop-In Cooktop burners
have exceptionally low simmer capabilities (See chart
on page 7). The burner system is designed for
maximum cleanability and control. All the cooktop
burners have electronic spark re-ignition to eliminate
continuously burning pilot; if the flame is blown out,
it will relight.
TOP VIEW OF KNOB BEZEL
“ON”
INDICATOR LIGHT
C
ap
M
ain Bur
ner
P
or
t R
ing
Burner Base
Simmer Ring
Electrode
Venturi
L
ocating
Not
ch
L
oca
ting Pin
Hole Inside
Br
ass R
ing
Locating Pin
L
oca
ting P
in
Hex Nut
Locating Pin