Planning Guide

Data sheet
48" Access Drawer
Model no:
ADR48
(refer page 2 for metric measurements)
Product Dimensions
in
a Overall height of product
21 7/8"
B Overall width of product
48"
c Overall depth of product (excluding handles)
25 7/16"
d Depth of front frame
2"
e Width of front frame
1 1/8"
f Height of chassis
19 15/16"
g Width of chassis
45 15/16"
H Depth of chassis
23 7/16"
I Height of bottom flange
1"
j Height of top flange
7/16"
k Width of side flanges
15/16"
l Width of handles
8"
m Height of handles
1 3/16"
n Depth of handles
1 3/16"
o Height of tall drawer fronts
19 3/8"
P Height from bottom datum to top of lower drawer
13 3/8"
Cutout Dimensions
in
Overall width of cutout
46"
Overall height of cutout
20"
IMPORTANT NOTE: This datasheet shows only the proud installation option.
For full installation and clearance details please refer to our installation
manual.
INDICATES CABINETRY / PRODUCT DATUM --------------------------
INDICATES CUTOUT -------------------------------------------------------
DATE: 31.08.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
0 5 10 20
inches
25 7/16"
A
FRONT VIEW
PROFILE VIEW
C
j
G
F
kk
48"
B
h
E
P
o
21 7/8"
PLAN VIEW
i
n
m
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
l
DATUM:
BOTTOM OF PRODUCT
d
d
h