THE PROFESS Installation MODELS: m DD-36SS m DD-30SS Guide NDRAFT
A MESSAGE TO OUR CUSTOMERS Thank you for selecting this DCS Downdraft this installation Vent System. Because of its unique features, we have developed Guide, It contains valuable information on how to properly install your new Downdraft Vent System for years of safe and enjoyable cooking. For your convenience, product questions can be answered by a DCS Customer Care Representative by phone: 1-888-281-5698, emaih support@dcsappliances.com orbymail: Fisher& PaykelAppliances, Inc.
TABLE OF CONTENTS INSTALLATION INSTRUCTIONS .................................................................................................................................... d-11 Tools Needed ............................................................................................................................................................ 6 Plan The Ductwork ........................................................................................................................................
SAFETY PRACTICES & PRECAUTIONS WARNING: ALL WALL AND FLOOR OPENINGS WHERE THE Downdraft IS INSTALLED MUST BE SEALED. Consult the cooktop installation instructions given by the manufacturer before making any cutouts. MOBHLE HOME INSTALLATION -The instaHHation of this Downdraft must conform to the Manufactured Home Construction Mobile and Safety Standards, TitHe 24 CFR, Part 3280 (formerHy FederaH Standard Home Construction and the appHiance wiring I and Safety, TitHe 24, HUD, Part 280).
PLANNING THE INSTALLATION VENTING REQUIREMENTS Determine which venting method is best for your app[kafion. Ductwork can extend either through the wall[ or the roof, The [ength of the ductwork and the number of eHbows shouHd be kept to a minimum to provide efficient performance. The size of the ductwork shouHd be uniform. Do not install[ two eHbows together. Use duct tape to sea[ all[joints in the ductwork system. Use cauHking to sea[ exterior wall[ or floor opening around the cap.
27" for 30" rr 33" for 36" m( 26-1/8" Fig° 01 Downdraft Dimensions 17-3/16" 17-9/16" + 1/2' rain.
INSTALLATION INSTRUCTIONS TOOLS NEEDED FOR INSTALLATION I PARTS SUPPLIED Saber Saw or Jig Saw [] 6 Mounting [] DrH[ [] 2 End Caps [] lq/4Wood [] FOR INSTALLATION Brackets [] 16 Screws DrH[ Bit Pliers [] 1 Backdraff Damper [] Phillips Screwdriver [] Hat Blade Screwdriver [] Wire Stripper or Utility Knife [] Metal Snips [] Measuring Tape or RuHer [] Leve[ [] Pencil [] Caulking Gun [] Duct Tape PARTS NEEDED FOR INSTALLATION [] 2 Conduit Connectors [] Power SuppHy CaNe [] 1 WaHHor Roof Cap I
INSTALLATION INSTRUCTIONS PLAN AND MAKE THE CUTOUT Ht is recommended that the installer draw the cooktop and downdraft cutouts on the countertop before making any cutouts to avoid mistakes. Fig. 06 shows the cutout dimensions for DCS CT-365 and CT-304 and for aHH other cooktops see Fig.O6a (page 8). Fig.07 shows the toHerances between the cooktop and the downdraft. These toHerances must be observed for proper instaHHation.
INSTALLATION INSTRUCTIONS DROPqN COOKTOP (MISCo BRAND) CUT-OUT DUMENSUONS(WUTH DOWNDRAFT) to combustible surface / O0 Measuredfrom the rearedgeof cooktop to rearof downdraff cutout. It is recommendedthat the installerdraw the cooktop and downdraff cutoutson the countertopbeforemaking any cutoutsto avoid mistakes. Fig. 05a INSTALLING 1) DOWNDRAFT VENT Remove the unit from the carton and pHace on a fiat surface for assembHy. Cover the surface to prevent accidenta[ damage.
INSTALLATION INSTRUCTIONS INSTALLING DOWNDRAFT end cap (continue@ UNDER COUNTER MOUNT BRACKETS The bwer support iegs have homes for mounting to the cabinet floor and can be installed on both sides OVER COUNTER I SUPPORT ARMS depending upon the iength required. Determine if the homesshouid be in the front or on the sides. s) Carefully insert the unit into the cutout. Due to the size and weight, two peopie are recommended when [ifting this unit.
INSTALLATION INSTRUCTIONS INSTALLING DOWNDRAFT (continued) the downdraft. knockout The square metal frame must be attached on the rear must be removed. to the mouth of the blower. The exhaust A metaH pilate and two screws are suppHied in the hardware package to cover the unused exhaust exit. CAUTION: Make sure that compartment the wiring cable connecting remains securely attached the blower to the field wiring under the two cable clamps. 7) Attach the Backdraft Damper.
INSTALLATION INSTRUCTIONS INSTALLING DOWNDRAFT 13) Connect the ductwork outside of the home. ]4) (cont#nued) to the Backdraft damper. Sea[ a[[ joints with duct tape and vent to the [nstaHHthe cooktop according to the cooktop manufacturer's instructions. that the rear edge of the cooktop overHaps the front edge of the downdraft Check to make sure by 3/8". IF THE BLOWER DOES NOT OPERATE: 1) Check that the circuit breaker is not tripped or the house fuse bHown.
WiRiNG DIAGRAM SWITCH FAN N,O. BLK :z© SWITCH FILTERN.O.
SERVICE NOW TO OBTAIN SERVICE: Before you can for service: 1) Hsthe circuit breaker tripped or the fuse Nown? 2) Hsthere a power outage in the area? 3) Are the grease tinters propedy 4) WHHthe unit go up/down For warranty service, contact following information ready: I Modal Number installed? and the motor contrail is ON? DCS Customer Care at (888) 281-5698.
LIMITED WARRANTY When you purchase a new DCS Ventilation receive a One year Limited Product Warranty covering for persona[ or consumer Limited Warranty on the switches and motor (parts onHy) for servicing States, Hawaii,Washington use you automatically parts and [abor for the entire product, within and a Five year the 48 mainHand United D.C and Canada.
7.Noiseor vibrationthat is considered normal,for example, drain/fansounds, regeneration noises oruserwarningbeeps. 8.Correcting damage causedbypests, forexample, rats,cockroaches etc. B.Defects causedbyfactors otherthan: 1.Normal domestic useor 2.Useinaccordance withtheProduct's UserGuide. C.Defects totheProduct causedbyaccident, neglect, misuse, fire,floodorActofGod. D.Thecostof repairs carriedoutbynon-authorized repairers orthecostofcorrecting such unauthorized repairs. E.
16
A Fisher & Payke! Appliances, Inc Company Fisher & Paykel Appliances, Inc. 5900 SkyFab Road, Huntington Beach, CA 92647 Customer Care: 888281.5698 Fax: 714_372.7003 www.dcsappFiances_com As product improvement is an ongoing process at DCS, we reserve the right to change specifications or design without notice. DCS am6liore constamment ses produits et se r_serve le droit de modifier les specifications ou la conception de ses produits sans aucun pr_avis, Part No. ! 7493 Rev.
