Installation Guide

7
INSTALLATION
CLEARANCE SPECIFICATIONS
Note: The stated clearance to combustibles represents a surface temperature of 90oF (32oC) above room tem-
perature. Building materials with a low heat tolerance (such as plastics, vinyl siding, canvas, tri-ply, etc.) may be
subject to degradation at lower temperatures. It is the installer’s responsibility to assure that adjacent materials
are protected from degradation.
0
0
& 45
0
INSTALLATION
MINIMUM CLEARANCES TO COMBUSTIBLE AND NONCOMBUSTIBLE MATERIAL.
48"
18"
min.
min.
18"
FRONT VIEW
Wall
(Combustible or
Non-combustible
Surface)
(Combustible or
Non-combustible
Surface)
Wall
Heater Mounting
Body Assy.
FLOOR
96"
min.
Make sure the heater is
level (see Warning on
page 6).