Installation Guide

7
GRIDDLE PLATE
2
2
1
1
3
Remove the vent assembly
by pulling up gently from the
product, and set aside on a
protected surface.
Grip the front and rear of the
plate. Lower the plate to slot
back in place onto the product
ensuring it is centered.
Grip the griddle plate from under
the brackets at the front and rear
of the product as shown.
Replace the vent assembly by
slotting the flash tubes back
gently into the support brackets
and lowering.
Ensure the griddle plate is removed before moving the product to the installation location.
Excessive weight Hazard
Two or more persons are required to handle the griddle plate.
Lift up the griddle assembly and
set aside on a protected surface.
front of griddle rear of griddle
Removing the griddle plate
Replacing the griddle plate