Owner`s manual

3
MANUAL RELEASE
The MANUAL RELEASE switch is located on the left side of the
gate operator frame towards the chain. To operate the gate
manually, place the MANUAL RELEASE switch in the down
position. This will remove power to the motor allowing the gate to
be manually opened.
INTRODUCTION
CARTON INVENTORY
Before beginning your installation check that all components
were provided and received undamaged. Refer to list below
for factory provided parts.
Description Qty.
Operator 1
Gate Pull Tabs 2
(MS204 Chain Bolt)
Warning Signs 2
12Vdc, 7AH Sealed Batteries 2
Owner’s Manual 1
Flip switch up for
normal operation.
Flip switch down to
disengage power to
motor and for manual
operation.
Normal Operation
Position
Manual Release
Position