User guide

Developers guidelines | AT commands
104 June 2010
Ensemble S6: GSM network services
Commands
AT+CNUM Subscriber number (ver. 2)
Description: Returns the MSISDN related to the subscriber (this information can be
stored in the SIM or in the ME). If a subscriber has different MSISDN for
different services, each MSISDN is returned in a separate line.
Note: The implementation of this command is according to Bluetooth HFP
1.5, which deviates somewhat from the 3GPP. The parameters <alpha>
and <itc> are not supported but included to show the full command as
specified in 3GPP TS 27.005.
Action command: AT+CNUM
Action command
response: +CNUM:
[<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc>]][<CR><LF>
+CNUM: [<alpha2>],<number2>,<type2>[,<speed>,<service> [,<itc>]]
[…]]
Test command: AT+CNUM=? Shows if the command is supported.
Parameters:
<alphax>: Not supported
<alphax> Description
String type Associated with <numberx>. Not supported
<numberx>:
<numberx> Description
String type Phone number of format specified by <typex>
<typex>:
<typex> Description
Integer format Type of address, (refer to refer 3GPP 24.008)
<speed>: Not supported
<speed> Description
Integer Data rate, as defined in subclause 6.7 3GPP 27.007
(+CBST command). Not supported
<service>: service related to the phone number.
<service> Description
0 Asynchronous modem
1 Synchronous modem. Not supported
2 PAD Access (asynchronous). Not supported