User guide

Developers guidelines | AT commands
108 June 2010
AT+CLIP Calling line identification (ver. 2)
1 Available
2 Current
3 Forbidden
<AcT>:
<stat> Description
0 GSM. Default value
1 GSM Compact. Not supported
2 UTRAN
Description: This command refers to the GSM/UMTS supplementary service CLIP
(Calling Line Identification Presentation) that enables a called subscriber to
get the Calling Line Identity (CLI) of the calling party when receiving a
mobile terminated call. Set command enables or disables the presentation
of the CLI at the terminal equipment. It has no effect on the execution of
the supplementary service CLIP in the network.
Read command gives the status of <n> and also triggers an interrogation
of the provision status of the CLIP service according to 3GPP TS 22.081
(given in <m>).
Test command returns values supported by the phone as a compound
value.
This command activates the result code +CLIP.
Set command: AT+CLIP=<n>
Read command: AT+CLIP?
Read command
response: +CLIP:<n>,<m>
Test command: AT+CLIP=? Shows if the command is supported.
Test command
response: +CLIP: (list of supported <n>s)
Parameters:
<n>: Sets/shows the result code representation status in the phone.
<n> Description
0 Disable. Default value
1 Enable
<m>: Shows the subscriber CLIP service status in the network.
<m> Description
0 CLIP not provisioned
1 CLIP provisioned
2 Unknown, for example, no network
<stat> Description