User guide

Developers guidelines | AT commands
118 June 2010
AT+CDIP Called line identification presentation
Read command: AT+CAMM? Displays the current <acmmax> value
Test command: AT+CAMM=? Shows if the command is supported
Parameters:
<passwd>:
<passwd> Description
String SIM – PIN2
<acmmax>:
<acmmax> Description
String Accumulated call meter maximum value. Similarly
coded as <ccm> under AT+CAOC. The value “0”
disables the ACMmax feature
Description: This command relates to a network service that provides “multiple called
numbers (called line identifications) service” to an MT. This command ena-
bles a called subscriber to get the called line identification of the called
party when receiving a mobile terminated call. Set command enables or
disables the presentation of the called line identifications at the TE.
When the presentation of the called line identification at the TE is enabled,
+CDIP:<number>,<type>[,<subaddr>,<satype>] response is returned after
every RING (or +CRING: <type>) result code sent from TA to TE. The man-
ufacturer specifies if this response is used when normal voice call is
answered.
Read command gives the status of <n> and also triggers an interrogation
of the provision status of the “multiple called numbers” service.
Set command: AT+CDIP=[<n>]
Enables/disables a called subscriber to get the called line identification of
the called party when receiving a mobile terminated call.
Read command: AT+CDIP? Displays the current <n> and <m> settings.
Read command
response: +CDIP: <n>,<m>
Test command: AT+CDIP=? Shows if the command is supported.
Test command
response: +CDIP: (list of supported <n>s)
Parameters:
<n>:
<n> Description
0 Disable presentation of +CDIP result code. Default
value
1 Enable presentation of +CDIP result code
<m>: