User guide

Developers guidelines | AT commands
135 June 2010
“SC” SIM (lock SIM card). SIM asks for a password when
the phone is powered-up and when this lock
command is issued
“P2” SIM PIN 2.
”AO” BAOC (Barr All Outgoing Calls). Refer to 3GPP TS
22.088 clause 1
”OI” BOIC (Barr Outgoing International Calls). Refer to
3GPP TS 22.088 clause 1
“AI” BAIC (Barr All Incoming Calls). Refer to 3GPP TS
22.088 clause 2
“IR” BIC-Roam (Barr Incoming Calls when Roaming
outside the home country). Refer to 3GPP TS
22.088 clause 2
“OX” BOIC-exHC (Barr Outgoing International Calls
except to Home Country). Refer to 3GPP TS 22.088
clause 1
“NT” Barr incoming calls from numbers that are not
stored in TA memory. Not supported
“NM” Barr incoming calls from numbers that are not
stored in phone memory. Not supported
“NS” Barr incoming calls from numbers that are not
stored in SIM memory. Not supported
“NA” Barr incoming calls from numbers that are not
stored in any memory. Not supported
“AB” All barring services. Refer to 3GPP TS 22.030
(applicable only for <mode>=0)
“AG” All outgoing barring services, refer to 3GPP TS
22.030 (applicable only for <mode>=0)
“AC” All incoming barring services. Refer to 3GPP TS
22.030 (applicable only for <mode>=0)
“FD” SIM card or active application in the UICC (GSM or
USIM) fixed dialling memory feature.
If PIN2 authentication has not been done during the
current session, PIN2 is required as <passwd>
“PN” Network personalisation. Refer to 3GPP TS 22.022.
Not supported
“PU” Network subset personalisation Refer to 3GPP TS
22.022. Not supported
“PP” Service provider personalisation. Refer to 3GPP TS
22.022. Not supported
“PC” Corporate personalisation. Refer to 3GPP TS
22.022. Not supported
<mode>:
<mode> Description
0 Unlock
<fac> Description