User guide

Developers guidelines | AT commands
137 June 2010
<fac> Description
“CS” CNTRL (lock control surface). For example, phone
keyboard. Not supported
“PS” PH-SIM (lock phone to SIM card). Phone asks for a
password when other than current SIM card is
inserted
“SC” SIM (Lock SIM card). SIM asks for a password
when the phone is powered-up and when this lock
command is issued
“P2” SIM PIN2
“AO” BAOC (Barr All Outgoing Calls). Refer to GSM 02.88
clause 1
“OI” BOIC (Barr Outgoing International Calls). Refer to
GSM 02.88 clause 1
“AI” BAIC (Barr All Incoming Calls). Refer to GSM 02.88
clause 2
“IR” BIC-Roam (Barr Incoming Calls when Roaming
outside the home country). Refer to GSM 02.88
clause 2
“OX” BOIC-exHC (Barr Outgoing International Calls
except to Home Country). Refer to GSM 02.88
clause 1
“NT” Barr incoming calls from numbers that are not
stored in TA memory. Not supported
“NM” Barr incoming calls from numbers that are not
stored in phone memory. Not supported
“NS” Barr incoming calls from numbers that are not
stored in SIM memory. Not supported
“NA” Barr incoming calls from numbers that are not
stored in any memory. Not supported
“AB” All barring services. Refer to GSM 02.30
“AG” All outgoing barring services. Refer to GSM 02.30
“AC” All incoming barring services. Refer to GSM 02.30
“FD” SIM fixed dialling memory feature (if PIN2
authentication has not been done during the current
session, PIN2 is required as <passwd>). Not
supported
<oldpwd>:
<oldpwd> Description
String type <oldpwd> will be the same as password specified
for the facility from the ME user interface or with
command Change Password AT+CPWD
<newpwd>: