User guide

Developers guidelines | AT commands
151 June 2010
AT+CLAN Language
<type> Description
Integer Type of address octet in integer format (refer to
GSM 04.08 subclause 10.5.4.7). Default value is
145 when dialling string includes international
access code character “+”, otherwise 129. Only
valid for:
• <ccstatus> = 1 (CALLING)
• <ccstatus> = 5 (WAITING)
• <ccstatus> = 6 (ALERTING)
Description: Sets the language in the phone. If the language has been set to “AUTO”,
the read command returns the current language set from the SIM card.
Hence, the “AUTO” code is never returned by the read command.
Set command: AT+CLAN=<code>
Read command: AT+CLAN? Displays the current language setting.
Test command: AT+CLAN=? Shows if the command is supported.
Test command
response: +CLAN: (list of supported <code>s)
Parameter:
<code>: Language codes defined in ISO 639. Consists of two characters, for
example, “sv”, “en”, and so on.
<code> Description
“AUTO” Read the language code from the SIM card.
“AUTO” is never returned by the read command
Miscellaneous language codes