User guide

Developers guidelines | AT commands
154 June 2010
AT*ESKL Key-lock mode
AT*ESKS Key sound
Parameter:
<mode>:
<mode> Description
0 Silent mode off. Default value
1 Silent mode on
Description: Sets the key lock mode in the phone.
Set command: AT*ESKL=<mode>
Read command: AT*ESKL? Displays the current <mode> setting.
Test command: AT*ESKL=? Shows if the command is supported.
Test command
response: *ESKL: (list of supported <mode>s)
Parameter:
<mode>:
<mode> Description
0 MANUAL. The user has to manually lock the
keyboard. Default value
1 AUTOMATIC. The phone will, after a time delay,
automatically lock the keyboard
Description: Sets the key sound in the phone.
Set command: AT*ESKS=<mode>
Read command: AT*ESKS? Displays the current <mode> setting.
Test command: AT*ESKS=? Shows if the command is supported.
Test command
response: *ESKS: (list of supported <mode>s)
Parameter:
<mode>:
<mode> Description
0 SILENT – no sound when a key is pressed. Default
value
1 CLICK – short click when a key is pressed.
2 TONE – a continuous tone when a key is pressed.