User guide

Developers guidelines | AT commands
162 June 2010
AT*EKSE Ericsson keystroke send
AT+CRSL Ringer sound level (ver. 2)
Description: Sends a keystroke identifier to the ME. The ME makes a context sensitive
interpretation of the keystroke based on the state of the MMI (for instance,
SMS input mode, Standby, Charge-only Mode).
Note: If the value of the keystroke identifier does not correspond to a sup-
ported Unicode value, the correct character is not given. See also
www.unicode.org
.
Execution
command: AT*EKSE=<key>
Test command: AT*EKSE=? Shows if the command is supported.
Test command
response: *EKSE: (list of supported <key> range)
Parameters:
<key>:
<key> Description
0–65535 Keystroke identifier given in Unicode
Description: Selects the incoming call ringer sound level of the ME. If <level> is set to
255, the ringer level will be increasing.
Line 1 is default for <calltype> if the parameter is not given.
All <calltype>s are set to <level>, even if only one unique <calltype> is set
in the command.
Execution
command: AT+CRSL=<level>[,<calltype>]
Read command: AT+CRSL? Displays current settings.
Read command
response: +CRSL: <level1>[,<calltype1> [<CR><LF>…
+CRSL: <level n>[, <calltype n>]]]
Test command: AT+CRSL=? Shows if the command is supported.
Test command
response: +CRSL: (list of supported <level>s)[,(list of supported <calltype>s)]
Parameters:
<level>:
<level> Description
0 Ringer off. Default value
1 Ringer level 1
2 Ringer level 2
3 Ringer level 3
4 Ringer level 4