User guide

Developers guidelines | AT commands
163 June 2010
AT+CLVL Loudspeaker volume level
AT+CMUT Mute control
5 Ringer level 5
6 Ringer level 6
7 Ringer level 7
8 Ringer level 8
255 Increasing ringer level
<calltype>: There is no specific setting for the calltype parameters in the phone. The
three supported calltypes are pointing at the the same audio setting in the
phone. For example, if Line 1 is changed, also Line 2 and Data will change.
<calltype> Description
1 Line 1. Default value
2 Line 2
4 Data
Description: Selects the volume of the internal loudspeaker (call volume) of the ME.
Execution
command: AT+CLVL=<level>
Read command: AT+CLVL? Displays current settings.
Read command
response: +CLVL: <level>
Test command: AT+CLVL=? Shows if the command is supported.
Test command
response: +CLVL: (list of supported <level>s)
Parameter:
<level>:
<level> Description
0
Loudspeaker off.
Default value
1 Loudspeaker level 1
2 Loudspeaker level 2
3 Loudspeaker level 3
4 Loudspeaker level 4
5 Loudspeaker level 5
6 Loudspeaker level 6
7 Loudspeaker level 7
8 Loudspeaker level 8
Description: Enables and disables the uplink voice muting during a voice call.
<level> Description