User guide

Developers guidelines | AT commands
165 June 2010
AT+CRMP Ring melody playback (ver. 2)
Description: Causes the phone to playback a specific ring type.
The playback is not stopped when keys are pressed on the phone.
The playback is stopped when the issuing accessory is disconnected from
the phone.
Execution
command: AT+CRMP=<call_type>[,<volume> [,<type>]]
Test command: AT+CRMP=? Shows if the command is supported.
Test command
response: +CRMP: (list of supported <call_type>s),(list of supported <volume>s),(list
of supported <type>s)
Parameters:
<call_type>:
<call_type> Description
0 Stop playing sound
1 Line 1. Default value
2 Line 2
3 Fax
4 Data
5 Alarm
<volume>:
<volume> Description
0–8 Volume level (0 = Off, 8 = maximal volume). Default
value = 3
255 Step. Not supported
<type>:
<type> Description
0 Manufacturer defined
1 User defined. Default value