User guide

Developers guidelines | AT commands
175 June 2010
Ensemble S10: GSM mobile equipment
error control
Commands
AT+CMEE Report mobile equipment error
OK The phone keyboard will, after a time delay, be
locked
Description: Disables or enables the use of result code +CME ERROR as an indication
of an error relating to the functionality of the ME. When enabled, ME
related errors cause +CME ERROR final result code instead of the regular
ERROR final result code. ERROR is returned only when the error is related
to syntax, invalid parameters or TA functionality.
Set command: AT+CMEE=[<n>]
Read command: AT+CMEE? Displays the current <n> setting.
Test command: AT+CMEE=? Shows if the command is supported.
Test command
response: +CMEE: (list of supported <n>s)
Parameter:
<n>:
<n> Description
0 Disable +CME ERROR result code. Use ERROR
instead. Default value
1 Enable +CME ERROR result code and use numeric
<err> values
2 Enable +CME ERROR result code and use verbose
<err> values
AT command Response Comment