User guide

Developers guidelines | AT commands
181 June 2010
1 If SMS-DELIVER is stored into ME/TA, indication of
the memory location is routed to the TE using
unsolicited result code: +CMTI: <mem>, <index>
3 Class 3 SMS-DELIVERs are routed directly to TE
using unsolicited result codes
+CMT: <length><CR><LF><pdu>. Messages of
other data coding schemes result in indication as
defined in <mt>=1
<bm>:
<bm> Description
0 Store message to “BM” (or some manufacturer
specific memory). No CBM indications are routed to
the TE. Default value
2 New CBMs are routed directly to the TE using
unsolicited result code:
+CBM: <length><CR><LF><pdu> (PDU mode
enabled)
or
+CBM:
<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><d
ata> (text mode enabled)
<ds>:
<ds> Description
0 No SMS-STATUS-REPORTs are routed to the TE.
Default value
1 SMS-STATUS-REPORTs are routed to the TE using
unsolicited result code:
+CDS: <length><CR><LF><pdu> (PDU mode
enabled)
or
+CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
(text mode enabled)
<bfr>:
<bfr> Description
0 TA buffer of unsolicited result codes defined within
this command is flushed to the TE when <mode>
1–3 is entered (OK response is given before flushing
the codes). Default value
<mt> Description