User guide

Developers guidelines | AT commands
185 June 2010
AT+CMSS Send from storage (ver. 2)
Execution
command: AT+CMGS=<length><CR><pdu><ctrl-Z/ESC>
Execution command
response: +CMGS: <mr>[,<ackpdu>]
Test command: AT+CMGS=? Shows if the command is supported.
Parameters:
<mr>:
<mr> Description
Integer type GSM 03.40 TP-Message-Reference in integer
format
<length>:
<length> Description
Integer type Value indicating in PDU mode (AT+CMGF=”0”), the
length of the actual TP data unit in octets. The RP
layer SMSC address octets are not counted in the
length
<ackpdu>:
<ackpdu> Description
Hexadecimal value GSM 03.40 RP-User Data element of RP-ACK PDU.
Format is the same as for <pdu> in case of SMS,
but without GSM 04.11 SC address field and
parameter are bounded by double quote characters
like a normal string type parameter
Description: Sends message with location value <index> from message storage
<mem2> (see AT+CPMS) to the network (SMS-SUBMIT or SMS-COM-
MAND). <mr> is returned after successful delivery.
Note: Parameters <da> and <toda> will be accepted but ignored by ME
(that is, ME will not use the parameters).
Execution
command: AT+CMSS=<index>[,<da>[,<toda>]]
Execution command
response: +CMSS: <mr>
Test command: AT+CMSS=? Shows if the command is supported.
Parameters:
<index>: Integer. Value in the range of location numbers supported by the
associated memory.
<da>: GSM 03.40 TP-Destination-Address. Address value field in string format.
BCD numbers are converted into characters of the currently selected
terminal equipment character set. The type of address is given by <toda>.
<toda>: GSM 04.11 TP-Address Type-Of-Address octet in integer format.