User guide

Developers guidelines | AT commands
204 June 2010
Read command
response: +CGEQREQ: <cid>, <Traffic class>,<Maximum bitrate UL>,<Maximum
bitrate DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate DL>,<Delivery
order>,<Maximum SDU size>,<SDU error ratio>,<Residual bit error
ratio>,<Delivery of erroneous SDUs>,<Transfer delay>,<Traffic handling
priority>[<CR><LF>
+CGEQREQ: <cid>, <Traffic class>,<Maximum bitrate UL>,<Maximum
bitrate DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate DL>,<Delivery
order>,<Maximum SDU size>,<SDU error ratio>,<Residual bit error
ratio>,<Delivery of erroneous SDUs>,<Transfer delay>,<Traffic handling
priority>
[…]]
Test command: AT+CGEQREQ=? Shows if the command is supported.
Test command
response: +CGEQREQ: <PDP_type>, (list of supported <Traffic class>s),(list of
supported <Maximum bitrate UL>s), (list of supported <Maximum bitrate
DL>s), (list of supported <Guaranteed bitrate UL>s), (list of supported
<Guaranteed bitrate DL>s),(list of supported <Delivery order>s),(list of
supported <Maximum SDU size>s),(list of supported <SDU error
ratio>s),(list of supported <Residual bit error ratio>s),(list of supported
<Delivery of erroneous SDUs>s),(list of supported <Transfer delay>s),(list
of supported <Traffic handling priority>s)[<CR><LF>
+CGEQREQ: <PDP_type>, (list of supported <Traffic class>s),(list of
supported <Maximum bitrate UL>s), (list of supported <Maximum bitrate
DL>s), (list of supported <Guaranteed bitrate UL>s), (list of supported
<Guaranteed bitrate DL>s),(list of supported <Delivery order>s),(list of
supported <Maximum SDU size>s),(list of supported <SDU error
ratio>s),(list of supported <Residual bit error ratio>s),(list of supported
<Delivery of erroneous SDUs>s),(list of supported <Transfer delay>s),(list
of supported <Traffic handling priority>s)
[…]]
Parameters:
<cid>: See the AT+CGDCONT command
<Traffic class>:
<Traffic class> Description
0 Conversational
1 Streaming
2 Interactive
3 Background
4 Subscribed value
<Maximum bitrate
UL>: