User guide

Developers guidelines | AT commands
205 June 2010
<Maximum bitrate
UL>
Description
Integer The maximum number of Kbps delivered to UMTS
(uplink traffic) at a SAP.
Note: Not all integer values are valid. The general
rule is that the integer will be rounded down to the
nearest valid value. It is therefore possible that
reading back this parameter may produce a differ-
ent value than that used upon setting
UMTS: 0–384
GPRS/EDGE: 0–128
GPRS: 0–44
Default value = 0 – subscribed value will be
requested
<Maximum bitrate
DL>:
<Maximum bitrate
DL>
Description
Integer Maximum number of Kbps delivered by UMTS
(downlink traffic) at a SAP.
Note: Not all the integer values are valid. The
general rule is that the integer will be rounded down
to the nearest valid value. It is therefore possible
that reading back this parameter may produce a
different value than that used upon setting
UMTS: 0–384
GPRS/EDGE: 0–256
GPRS: 0–88
Default value = 0 – subscribed value will be
requested
<Guaranteed bitrate
UL>:
<Guaranteed bitrate
UL>
Description
Integer Guaranteed number of Kbps delivered to UMTS
(uplink traffic) at a SAP (provided that there is data
to deliver).
Note: Not all the integer values are valid. The
general rule is then that the integer will be rounded
down to the nearest valid value. It is therefore
possible that reading back this parameter may
produce a different value than that used upon
setting
UMTS: 0–384
GPRS/EDGE: 0–128
GPRS: 0–44
Default value = 0 – subscribed value will be
requested
<Guaranteed bitrate
DL>: