User guide

Developers guidelines | AT commands
229 June 2010
Ensemble S20: Ericsson specific AT
commands for GSM
Commands
AT*EPEE PIN event
AT*EAPS Active profile set
Description: Requests the phone to inform when the PIN code has been entered and
accepted. This command activates the unsolicited result code *EPEV.
Set command: AT*EPEE=<onoff>
Read command: AT*EPEE? Displays the current <onoff> setting.
Test command: AT*EPEE=? Shows if the command is supported.
Test command
response: *EPEE: (list of supported <onoff>s)
Parameter:
<onoff>:
<onoff> Description
0 Request for report on entered PIN is not activated
(off). Default value
1 Request for report on entered PIN is activated (on)
Description: Selects the active phone profile. The profiles may be renamed using
AT*EAPN. The profile consists of the parameters and settings for the
following commands:
AT command Name Ensemble
AT+CCFC Call Forwarding Number and Conditions S6
AT*EDIF Divert Function and Reporting S6
Set command: AT*EAPS=<index>
Read command: AT*EAPS? Displays the current <index> and <name_tagx> settings.
Test command: AT*EAPS=? Shows if the command is supported.
Test command
response: *EAPS: (list of supported <index>s),<nlength>
Parameters:
<index>:
<index> Description
Integer Number of profiles