User guide

Developers guidelines | AT commands
238 June 2010
Use scenarios
WAP browser settings
Ensemble S34: Internet account
commands
Common internet account command parameters
Some of the AT command parameters are shared between several S34 internet account AT commands.
These parameters and their value definitions are specified in this section.
AT command Response Comment
AT*EWDT=10 Set download timeout to 10 seconds
OK
AT*EWCT=10 Set connection timeout to 10 seconds
OK
Parameter:
<index>: Index of an account within the specific bearer type
<index> Description
0 This value is used in some commands to indicate
that all accounts that match filter conditions set on
another parameter should be affected by the
command, for example, all accounts with a given
bearer_type
1–255 Several accounts with the same index value may
exist, but only one account within a given bearer
type. The combination of bearer type and index
forms the unique reference to one specific Internet
account
<bearer_type>:
<bearer_type> Description
0 Used to specify that accounts of all bearer types
will be affected by the command
1 PS bearer.
PS connection over UMTS/GPRS network
2 CS bearer.
NTCSD connection over UMTS/GSM network