User guide

Developers guidelines | AT commands
239 June 2010
3 Bluetooth bearer
To connect with a remote Bluetooth LAN device
4 External Interface.
Test value, for dial-in use
<name>:
<name> Description
String type “Friendly” name of the Internet account. Maximum
20 characters. Mainly used in the MMI of the mobile
phone
<pref_serv>:
<pref_serv> Description
0 Preferred service – Packet Switched only.
An incoming call will be denied when running PS
connection(s), if system resources are insufficient to
serve both
1 Preferred service – Automatic.
An incoming call will put GPRS or UMTS packet
switched connection(s) on hold if system resources
are insufficient to serve both. Default Value
<traffic_class>:
<traffic_class> Description
0 Conversational
1 Streaming.
For example, for Voice over IP and other QoS
(delay) critical applications
2 Interactive.
For example, for Video/Audio over IP and other
QoS (delay+data volume) critical applications
3 Background.
For example, for Chat and applications with some
time requirements and low – medium data volume
4 Subscribed value.
For non-time critical applications.
Default value
<data_rate>:
<data_rate> Description
1 9600 Kbps.
GSM: 1 time slot * 9600
2 14400 Kbps.
GSM: 1 time slot * 14400
3 19200 Kbps
GSM: 2 time slots * 9600
<bearer_type> Description