User guide

Developers guidelines | AT commands
242 June 2010
AT*EIAD Internet account configuration, delete
<bearer_type> Description
1 PS bearer, that is, PS connection over UMTS/GPRS
network
2 CS bearer, that is, NTCSD connection over UMTS/
GSM network
3 Bluetooth bearer, that is, connection with remote
Bluetooth LAN device
4 External Interface. Test value for dial-in use
<name>: String. Each Internet Account has a “friendly” name.
Max 50 bytes, the actual number is dependent upon the character format
chosen with +CSCS command.
<index>: 1–255.
Index of an account within the specific bearer type.
There might be several accounts that has the same index value, but only
one account within a given bearer type. So it is the combination of bearer
type and index that forms the unique reference to one specific Internet
Account.
Description: Deletes one specific (or all) existing Internet account(s). Other Internet
account commands or GPRS AT commands, cannot be used to delete an
account.
Note: When <index>=0, <bearer_type> must also be =0 and vice versa.
Note: Both the <index> and <bearer_type> parameters must be specified,
otherwise an error is returned.
Execution
command: Delete account:
AT*EIAD=<index>,<bearer_type>
Test command: AT*EIAD=? Test if command is supported and show supported
parameters
Test command
response: Range of parameter values:
*EIAD: (0-255),(0-4)
Parameter:
<index>:
<index> Description
0 Delete all existing <bearer_type> Internet Accounts
1–255 Delete Internet Account with index as specified and
bearer type as specified.
For ranges and more details on <index>, see com-
mand AT*EIAC
<bearer_type>:
<bearer_type> Description
0 All bearers