User guide

Developers guidelines | AT commands
243 June 2010
AT*EIAW Internet account configuration, write general parameters
1–4 Specific bearer. For more information on bearer
types see <bearer_type> parameter definitions
under command AT*EIAC
Description: Specifies the general parameters of the Internet Account.
Note: Both the <index> and <bearer_type> parameters must be specified,
otherwise an error is returned.
Execution
command: AT*EIAW=<index>,<bearer_type>[,[<name>]]
Test command: AT*EIAW=? Test if command is supported and show supported
parameters.
Test command
response: Range of parameter values:
*EIAW: (1-255),(1-4),(““)
Parameter:
<index>:
<index> Description
1–255 Write general parameters of <bearer_type> Internet.
Account with index as specified
<bearer_type>:
<bearer_type> Description
0 All bearers.
Used together with Index=0, reading all Internet
Accounts of all bearer types.
Default value
1 PS bearer.
PS connection over UMTS/GPRS network
2 CS bearer.
NTCSD connection over UMTS/GSM network
3 Bluetooth bearer.
To connect with a remote Bluetooth LAN device
4 External Interface.
Test value, for dial-in use
<name>:
<name> Description
String type Each Internet Account has a “friendly” name.
Used mostly by MMI application of phone. Max 20
characters
<bearer_type> Description