User guide

Developers guidelines | AT commands
245 June 2010
AT*EIAPSW Internet account configuration, write PS bearer parameters
Description: Specifies PS specific parameters of one (or all) PS bearer Internet Account.
This command is used to define the most relevant Packet Switched (PS)
data connection parameters.
Note: All PS parameters of this command except <pref_serv> can also be
configured using the normal R’99 GPRS commands (see Ensemble S15
commands).
Note: For PS bearers, the <index> maps to the <ContextId> used in the
GPRS commands.
Note: If the user does not specify the parameter <Index>, an error is
returned.
Execution
command: AT*EIAPSW=<index>[,[<pref_serv>][,[<apn>]
[,[<traffic_class>][,[<header_compr>][,[<data_compr>]]]]]]
Test command: AT*EIAPSW=? Test if command is supported and show supported
parameters
Test command
response: Range of parameter values:
*EIAPSW: (1-255),(0-1),(“”),(0-4),(0-1),(0-1)
Parameter:
<index>:
<index> Description
1–255 Write packet switched bearer parameters of Inter-
net Account with index as specified.
For range and more details on <index>, see com-
mand AT*EIAC
<pref_serv>:
<pref_serv> Description
0 Preferred service – Packet Switched only.
Means that an incoming call will be denied when
running PS connection(s), if there are not system
resources to serve both
1 Preferred service – Automatic.
Means that an incoming call will put GPRS or UMTS
packet switched connection(s) on hold if there are
not system resources to serve both. Default value
<apn>:
<apn> Description
String type APN
<traffic_class>:
<traffic_class> Description
0 Conversational. Gives best effort