User guide

Developers guidelines | AT commands
252 June 2010
AT*EIACSR Internet account configuration, read CSD bearer parameters
<data_rate> Description
1 9600 Kbps, GSM: 1 time slot * 9600
2 14400 Kbps, GSM: 1 time slot * 14400
3 19200 Kbps, GSM: 2 time slots * 9600
4 28800 Kbps, GSM: 2 time slots * 14400 (or 3 time
slots * 9600). Default value
5 38400 Kbps, GSM: 4 time slots * 9600
Not supported
6 43200 Kbps, GSM: 3 time slots * 14400
7 57600 Kbps, GSM: 4 time slots * 14400
<data_compr>:
<data_compr> Description
0 V42bis data compression off
1 V42bis data compression on.
Using default V42 bis parameters for dictionary
size. Negotiates compression in both directions, Rx
and Tx. Default value
Description: Reads the CS bearer parameters of one (or all) CS bearer Internet
account(s).
Read command: AT*EIACSR=[<index>]
Response: List of Internet accounts with CSD parameters:
*EIACSR:
<index>,<dialout_nbr>,<dial_type>,<data_rate>,<data_compr>[:]
Test command: AT*EIACSR=? Test if command is supported and show supported
parameters
Test command
response: *EIACSR: (list of supported <index>s)
Parameter:
<index>: Integer, 0, 1-255
<index> Description
0 Read CSD bearer parameters of all CSD bearer
Internet Accounts.
If no CS bearer IAs exists, only OK is submitted.
Default value
1–255 Read CSD bearer parameters of the specified Inter-
net Account.
For range and more details on <index>, see com-
mand AT*EIAC
<dialout_nbr>: