User guide

Developers guidelines | AT commands
255 June 2010
AT*EIAAUW Internet account configuration, write authentication parameters
1–255 Read Bluetooth bearer parameters of Internet
Account with Index as specified
For range and more details on <index>, see com-
mand AT*EIAC
<bt_addr>:
<bt_addr> Description
Hex string Bluetooth device address, range: 48 bits.
<bt_addr> is represented as 12 hexadecimal char-
acters, for example, “0x000000AABBCC”.
Any number will have the MSB -> LSB (from left to
right)
<service>
<service> Description
0 LAN Access profile. Default value
1 PAN profile: role PANU (PAN User).
2 PAN profile: role NAP (Network Access Point)
3 PAN profile: role GN (Group ad hoc Network)
Description: Specifies the authentication parameters of one (or all) existing Internet
account(s).
Authentication parameters are used under any PPP negotiation as well as
under PS network connection establishment (context activation).
Note: If the user does not specify both parameters <Index> and
<bearer_type>, the command results in an error response.
Execution
command: AT*EIAAUW=<index>,<bearer_type>[,[<userid>][,[<password>][,[<auth_pr
ot>][,[<ask4pwd>]]]]]
Test command: AT*EIAAUW=? Test if command is supported and show supported
parameters
Test command
response: *EIAAUW: (list of supported <index>s),(list of supported
<bearer_type>s),(“”),(“”),(list of supported <auth_prot>s),(list of supported
<ask4pwd>s)
Parameter:
<index>: 1-255.
Write of <bearer_type> Internet Account with index as specified.
For range and more details on <index>, see under command AT*EIAC
<bearer_type>
<bearer_type> Description
1 PS bearer, that is, PS connection over UMTS/GPRS
network
<index> Description