User guide

Developers guidelines | AT commands
256 June 2010
2 CS bearer, NTCSD connection over UMTS/GSM
network
3 Bluetooth bearer, to connect with remote Bluetooth
LAN device
4 External interface, test value, for dial-in use
<userid>:
<userid> Description
String type User Identification for access to the IP network.
Max 50 8-bit characters
<password>:
<password> Description
String type Password for access to the IP network. Max 50
bytes, the actual number is dependent upon the
character format chosen with +CSCS command
<auth_prot> The authentication method is organised as 5-bit-long field in which each
bit indicates a specific authentication method. The bitmask set represents
the Authentication methods supported by the Internet Account in question
(<index>, <bearer>). Default value = 00111.
As an example, 00111, that is, bit2, bit1 and bit0 are set to 1, indicating
support for CHAP, PAP and None.
None means that it does not matter what authentication method is sup-
ported by the peer.
The value 0 (all bits set to 0) is not allowed. At least one bit has to be set to
1.
Note: Leading zeroes do not need to be stated. For example, 111 is the
same as 00111.
<auth_prot> Description
bit0 None
bit1 PAP
bit2 CHAP
bit3 MS-CHAP
bit4 MS-CHAPv2
<ask4pwd>:
<ask4pwd> Description
0 No. Default value
1 Yes.
Triggers MMI application to ask user for password
and user ID, instead of using the (eventually) stored
user ID and password
<bearer_type> Description