User guide

Developers guidelines | AT commands
260 June 2010
AT*EIALCPR Internet account configuration, read PPP parameters – LCP
<acfc> Description
0 00
Address Control Field Compression negotiation
might not be suggested.
Address Control Field Compression negotiation
might not be accepted
1 01
Address Control Field Compression negotiation
might be suggested.
Address Control Compression negotiation might
not be accepted
2 10
Address Control Field Compression negotiation
might not be suggested.
Address Control Field Compression negotiation
might be accepted
3 11
Address Control Field Compression negotiation
might be suggested.
Address Control Field Compression negotiation
might be accepted.
Default value
<keep_alive>:
<keep_alive> Description
0 LCP keepalive messages should not be sent.
Default value
1 LCP keepalive messages should be sent
<allowed_ncp>:
<allowed_ncp> Description
0 Not supported
1 01
Network Control Protocol IPCP allowed.
Default value
2 10
Network Control Protocol IPv6CP allowed
3 11
Both network control protocols allowed
Description: Reads the PPP LCP parameters of one (or all) Internet account(s).
Note: When <index>=0 it is necessary that <bearer_type>=0 and vice
versa.
Execution
command: AT*EIALCPR=[<index>,<bearer_type>]