User guide

Developers guidelines | AT commands
265 June 2010
Test command
response: Range of parameters:
*EIAIPCPR: (0-255),(0-4)
Parameter:
<index>:
<index> Description
0 Read IPCP parameters of all <bearer_type> Internet
Accounts. Default value
1–255 Read IPCP parameters of <bearer_type> Internet
Account with index as specified.
For range and more details on <index>, see com-
mand AT*EIAC
<bearer_type>:
<bearer_type> Description
0 All bearers. Used together with Index=0, reading all
Internet Accounts of all bearer types. Default value
1–4 Specific bearer. For more information on bearer
types see <bearer_type> parameter definitions
under command AT*EIAC
<ip_addr>:
<ip_addr> Description
String of format
“a.b.c.d”
IPv4 host address.
IP address of the ME. Default set to 0.0.0.0, which
means request for dynamic IP address to be
allocated by network upon connection
<prim_dns_addr>:
<prim_dns_addr> Description
String of format
“a.b.c.d”
IPv4 primary DNS server address.
Default set to 0.0.0.0, which means request for
dynamic IP address to be allocated by network
upon connection
<sec_dns_addr>:
<sec_dns_addr> Description
String of format
“a.b.c.d”
IPv4 secondary DNS server address.
Default set to 0.0.0.0, which means request for
dynamic IP address to be allocated by network
upon connection
<header_compr>:
<header_compr> Description
0 Header compression off. Default value
1 Header compression on