User guide

Developers guidelines | AT commands
267 June 2010
AT*EIADNSV6R Internet account configuration, read DNS parameters – IPv6CP
Description: Reads the IPv6CP parameters of one (or all) Internet account(s).
Note: For IPv6 addresses the notation :: can be used, but only once, for
example, destination address FFFF:FFFF:0:0:0:0:0:0:0:0:0:0:0:0:0:1 can be
written like FFFF:FFFF::1
Execution
command: AT*EIADNSV6R=[<index>,<bearer_type>]
Response: List of Internet accounts with PPP IPv6CP parameters:
*EIADNSV6R:<index>,<bearer_type>,<DNS_addr>[:]
Test command: AT*EIADNSV6R=? Test if command is supported and show supported
parameters
Test command
response: Range of parameters:
*EIADNSV6R: (0-255),(0-4)
Parameter:
<index>:
<index> Description
0 Read IPv6CP parameters of all <bearer_type> Inter-
net Accounts. Default value
1–255 Read IPv6CP parameters of <bearer_type> Internet
Account with index as specified.
For range and more details on <index>, see com-
mand AT*EIAC
<bearer_type>:
<bearer_type> Description
0 All bearers. Used together with Index=0, reading all
Internet Accounts of all bearer types
1–4 Specific bearer. For more information on bearer
types see <bearer_type> parameter definitions
under command AT*EIAC
<DNS_addr>:
<DNS_addr> Description
String of format
“x:x:x:x:x:x:x:x”
IPv6 primary DNS server address.
Each “x” is the hexadecimal value for one of the
eight 16bit pieces of the address.
Default set to ::, which means request for dynamic
IP address to be allocated by network upon
connection