User guide

Developers guidelines | AT commands
28 June 2010
AT&F Set to factory-defined configuration (ver. 2)
ATI Identification information (ver. 3)
Test command
response:
Z: (list of supported <profile>s)
Parameter:
<profile>:
<profile> Description
0 User profile to restore
Description: Instructs the DCE to set all parameters to default values specified by the
manufacturer, which may take in consideration hardware configuration
and other manufacturer-defined criteria.
Execution
command: AT&F[=<profile>]
Test command: AT&F=? Shows if the command is supported.
Test command
response: &F: (list of supported <profile>s)
Parameter:
<profile>:
<profile> Description
0 Resets all settings to factory defaults
Description: Causes the DCE to transmit one or more lines of information text, deter-
mined by the manufacturer, followed by a final result code. The <value>
parameter may optionally be used to select among multiple types of iden-
tifying information, specified by the manufacturer.
This command provides compatibility with Microsoft Windows 95.
Execution
command: ATI[<value>]
Execution command
response: <information>
Parameters:
<value>:
<value> Description
0 Same information as AT+GMM command (model
identification)
1 Software ID
3 Modem model description
5 Active settings