User guide

Developers guidelines | AT commands
282 June 2010
AT*SEREDI Red eye reduction indicator to the flash
AT*SEFRY Ready indicator to the ME
<action> Description
0 ME is not in a mode were the flash has to be ready
to fire. The flash disables its charging
1 ME is in a mode were the flash has to be ready to
fire. The flash starts to charge if not already charged
Description: Performs the following:
• Informs the ME that it supports red eye reduction with a certain time
out period.
• Requests information from the ME when red eye reduction should start
(as un unsolicited event).
Set command: AT*SEREDI=<time_out>
Test command: AT*SEREDI=?
Test if command is supported and show supported parameters
Test command
response: *SEREDI: (list of supported <time_out>s)
Unsolicited result
code: *SEREDI
Parameter:
<time_out>:
<time_out> Description
0–65535 The time, in milliseconds, between the red eye
reduction flashes and the picture taking.
Description: Informs the ME if the camera flash is ready to fire or not.
Command: AT*SEFRY=<action>
The flash informs the ME whether it is ready to fire or not.
Test command: AT*SEFRY=?
Test if command is supported and show supported parameters.
Test command
response: *SEFRY=(list of supported <action>s)
Parameter:
<action>:
<action> Description
0 The flash is not ready to fire by means of a strobe
signal through the system connector
1 The flash is ready to fire on a strobe signal through
the system connector