User guide

Developers guidelines | AT commands
283 June 2010
AT*SEAUP Sony Ericsson audio parameters
Description: Sends specific audio settings to configure the MS for a specific audio
device type. The accessory sends this command with all audio parameters
when ME connects to a BT audio device. It also sends it when it is
connected (when necessary), in this case the accessory only sends the
parameters it wishes to update.
Execution
command: AT*SEAUP=<unique_audio_id>,
<audio_class>,
[<ASC_Interface_TX_Impendence>],
[<ASC_Interface_RX_Impendence>],
[<ASC_Interface_Line_in_capable>],
[<ASC_Call_TXNOM>],
[<ASC_Call_TXGAIN>],
[<ASC_Call_SLRTarget>],
[<ASC_Call_TXNC>],
[<ASC_Call_TXFilter8>],
[<ASC_Call_RXNOM>],
[<ASC_Call_RXGAIN>],
[<ASC_Call_RLRTarget>],
[<ASC_Call_RXMAS>],
[<ASC_Call_RXFilter8>],
[<ASC_Call_Sidetone>],
[<ASC_Call_EC>],
[<ASC_Leisure_TXClip>],
[<ASC_Leisure_TXNC>],
[<ASC_Leisure_TXFilter48>],
[<ASC_Leisure_RXMAS>],
[<ASC_Leisure_RXNG>],
[<ASC_Leisure_RXFilter441>],
[<ASC_Leisure_RXFilter48>]
Response: Unsolicited result code: *SEAUPI: <status>
Test command: AT*SEAUP=? Test if command is supported
Parameter:
<unique_audio_id>:
<unique_audio_id> Description
0–2^32 The unique audio identity of the accessory, defined
in AT*SEAUDIO
<audio_class>:
<audio_class> Description
0–2^32 The default audio class of the accessory. Defined in
the AT*SEAUDIO command
Other parameters: