User guide

Developers guidelines | AT commands
287 June 2010
AT*SEBIC Status bar icon
AT*SEANT Antenna identification
<activation> Description
0 Deactivate subscription
1 Activate subscription
Description: Controls which status bar images to be shown. The <image> parameter
points out the image and the <show> parameter states if the image is to
be shown or not.
Set command: AT*SEBIC=<image>,<show>
Test command: AT*SEBIC=?
Test command
response Shows if the command is supported.
*SEBIC: (list of supported <image>s)
Parameter:
<image>:
<image> Description
1 Radio image in status bar
<show>:
<show> Description
0 Do not show
1 Show
Description: Informs the ME that it has an antenna. It is possible to turn on or zoff one
or many antenna types with one request. The parameter <status> indi-
cates if the accessory has an antenna and <pin> points out which pin it is
connected to. <type> indicates the type of the connected antenna and
which frequency span it can handle.
Execution
command:
Antenna status request:
AT*SEANT=<status>,<pin>,<type>[[,<pin>],<type] ...
Read command: Read current setting:
AT*SEANT?
Read command
response:
*SEANT:<status>,<pin>,<type>[[,<pin>],<type] ...
Test command: AT*SEANT=? Test if command is supported and show supported
parameters
Test command
response *SEANT:(list of supported <status>s),<pin>,(list of supported <type>s)
Parameter: