User guide

Developers guidelines | AT commands
29 June 2010
AT&W Store user profile
AT+CLAC List all available AT commands
7 Modem configuration profile (brief listing of the
modem functionality: fax classes, Bluetooth, IrDA,
modem type, and so on)
8 DCE hardware type version
9 PnP (Plug and Play) information
10 Same information as AT+GMI command
(manufacturer identification)
<information>:
<information> Description
string type The total number of characters, including line
terminators, in the information text returned in
response to this command may not exceed 2048
characters.
Note: The information text may not contain the
sequence “0” or “OK”, so that DTE can avoid false
detection of the end of this information text
Description: Stores the current user profile to non-volatile storage.
Execution
command: AT&W[<pr>]
Test command: AT&W=? Shows if the command is supported.
Test command
response: &W: (list of supported <pr>s)
Parameter:
<pr>:
<pr> Description
0 Stores current settings in User Profile 0
Description: Causes the ME to return one or more lines of AT commands.
Note: Only commands available to the user are returned.
Execution
command: AT+CLAC
Response: <AT Command1> [<CR> <LF> <AT Command2>[…]]
Test command: AT+CLAC=? Test if command is supported
Parameter:
<AT Command>:
<value> Description