User guide

Developers guidelines | AT commands
298 June 2010
*SEREDI Red eye reduction result code
*SEAULSI Audio line status result code
*SEFUNCI Functionality status result code
*SEVOLI Volume level result code
Unsolicited result
code: *SEMOD: <action>
Parameter:
<action>:
<mode> Description
0 ME is not in a mode were the flash has to be ready
to fire. Flash disables its charging
1 ME is in a mode were the flash has to be ready to
fire. Flash starts its charging if not already charged
Description: After *SEREDI is sent to the flash, the HW strobe signal has to come within
the time out described for the AT command. This is for the red eye
reduction to have effect (fire the flash while the pupils are constricted). If
the strobe comes after the time out period, the flash will fire anyway but
the red eye reduction effect will be less (pupils have started to dilate
again). The result code is activated using AT*SEREDI.
Unsolicited result
code: *SEREDI
Description: Unsolicited result code that is sent when mute has been changed or audio
line has been lost or received. The result code is activated using
AT*SEAULS.
Unsolicited result
code: *SEAULSI:<audio_line>,<audio_type>
Description: Unsolicited result code that is sent when functionality status has been
changed. The result code is activated using AT*SEFUNC.
Unsolicited result
code: *SEFUNCI: <mode>, <states>
Description: This result code is sent every time a change in volume level occurs for any
sound type. The result code carries information of the sound type and the
volume level. The sound types and their corresponding volume level range
are listed in the table below.