User guide

Developers guidelines | AT commands
30 June 2010
AT+CGMI Request manufacturer identification (ver. 1)
AT+CGMM Request model identification
<AT Commandn> Description
AT ... Defines the AT command including the prefix AT
Description: Causes the phone to return one or more lines of information text
<manufacturer>, determined by the phone manufacturer, which is
intended to permit the user of the ITAE/ETAE to identify the manufacturer
of the phone to which it is connected to. Typically, the text will consist of a
single line containing the name of the manufacturer, but manufacturers
may choose to provide more information if desired.
Execution
command:
AT+CGMI
Execution command
response: <manufacturer>
Test command: AT+CGMI=? Shows if the command is supported.
Parameter:
<manufacturer>:
<manufacturer> Function
Sony Ericsson Manufacturer name. The total number of
characters, including line terminators, in the
information text may not exceed 2048 characters.
Text must not contain the sequence 0<CR> or
OK<CR>
Description: Causes the phone to return one or more lines of information text <model>,
determined by the phone manufacturer, which is intended to permit the
user of the ITAE/ETAE to identify the specific model of the phone to which
it is connected to. Typically, the text will consist of a single line containing
the name of the product, but manufacturers may choose to provide more
information if desired.
Execution
command:
AT+CGMM
Execution command
response: <model>
Test command: AT+CGMM=? Shows if the command is supported.
Parameters:
<model>:
<model> Description
String
Example: AAB-
1022011-BV
A unique 10-character ASCII string, padded with
space if needed. The response may include blank
characters