User guide

Developers guidelines | AT commands
328 June 2010
AT*SEDISKL Sony Ericsson Disable Keylock
Description: The set command is used by an accessory to ensure that phone keys are
not locked when the accessory accesses the phone. When an accessory
disables keylock with the command, the original keylock status is a saved.
When the accessory disconnects or requests the keylock to be enabled
again via *SEDISKL the phone attempts to reset the original keylock state.
The result of this is subject to the state of the phone.
The command is not supported for phones with a two-state keylock or
phones without auto keylock.
Action command: AT*SEDISKL=<mode>
(Change keylock)
Action command
response: *SEDISKL: <mode>
Read command: AT*SEDISKL?
Read the current setting.
Read command
response: *SEDISKL: <mode>
Test command: AT*SEDISKL=? Test if command is supported.
Test command
response: *SEDISKL: list of supported <mode>s
Parameters:
<mode>:
<mode> Description
0 Keylock is disabled. Default
1 Keylock is enabled