User guide

Developers guidelines | AT commands

40 June 2010

AT*CPI Call progress information

145 ISDN/telephony numbering plan, international

number

161 ISDN/telephony numbering plan, national number

128–255 Other values refer to GSM 04.08 section 10.5.4.7

<alpha>:

<alpha> Description

String Alphanumeric representation of <number>

corresponding to the entry found in the phonebook.

The used character set should be the one selected

with command AT+CSCS

<priority>:

<priority> Description

Integer Optional digit type parameter indicating the eMLPP

priority level of the call. Values are specified in

3GPP TS 22.067

0–4 Valid values

Description: Activates or deactivates unsolicited result code

*CPI:<cId>,<msgType>,<ibt>,<tch>[,<dir>][,<mode>][,<number>][,<ton>]

in the ME.

Read command reports current <n> setting and current radio access tech-

nology used.

Set command: AT*CPI=<n>

Read command: AT*CPI?

Read command

response: *CPI:<n>

Test command: AT*CPI=? Test if the command is supported

Test command

response: *CPI: (list of supported <n>s)

Parameters:

<mode>:

<mode> Description

0 *CPI reporting disabled. Default value

1 *CPI reporting enabled with short list of parameters:

2 *CPI reporting enabled with extended parameter

set

<type> Description